Model i aqua spray

Disinfectant solution with bottom disinfection against microorganisms (bacteria, viruses, germs)

Categories

Material tray

Stainless steel V2A 1.4301

Material Brush

Body: PVC; Fibres: PA 6.0

Emergency exits

Usability verified by WAZ

Place of application

External driveway and internal passageway

Material Grate

Stainless steel V2A 1.4301

Flame resistant

tested in accordance with DIN 13501-1 Bfl-s1

Cleaning efficiency

verified by IBELIN institut

99 % FEWER MICROORGANISMS

Reduces the carry-over of bacteria, viruses and germs in the transitions from low-care to high-care areas

FULL STAINLESS STEEL

With the corrosion-resistant stainless steel grates, our Aqua models can be operated permanently wet and with disinfectant chemistry.

BOTTOM-DISINFECTION

Integrated spray lances disinfect the bottom of boxes, pallets and forks and ensure optimum cleaning and disinfection performance.

_ Dirt collection tray

To prevent dirt from being dispersed within production and logistics halls, it is collected in a collection tray under the cleaning mats.

The choice of the right tray size depends on three decisive factors:

requirements
Before making a decision, it must be clear what the situation is like on site, whether cleaning is to take place inside, outside or in both places and how wide the passageways are.
vehicles and frequency
Which vehicles cross the clean-off zone? Do shoe treads also need to be cleaned? How many crossings take place per day? If the frequency is higher, we recommend using a deeper tray because more dirt can be collected.
maintenance intervals
The deeper the tray, the more dirt it can hold and the longer the cleaning interval. This saves you work, as the collection trays need to be cleaned less frequently.

ProfilGate® i55 aqua spray

_ Determining the correct cleaning field length

Based on the analysis by the Fraunhofer IPA Institute and IBELIN laboratory, we know exactly the length at which our clean driving zones achieve their optimum cleaning effect. To get a rough estimate of this, you can use the following rules of thumb for planning:

Transport vehicles: At least three tire rotations are enough to remove 80 % of the dirt. This means that your cleaning area should be at least 3 - 4 times the tread area of the largest tire circumference to be cleaned.

Shoe soles: For cleaning shoe soles, each foot should have at least four to six contacts with the cleaning field with a normal stride length.

Of course, the conditions on site play a decisive role in exact planning. These include the type of vehicle and dirt, dry or wet cleaning and much more. If you have any questions on this topic, we will be happy to advise you.